We invite you to familiarize yourself with our completed projects and manufactured paper-making equipment for the pulp and paper industry over the past 3 years:
- Ukraine;
- Other countries.
And also with a list of enterprises of the mining and metallurgical complex to which our equipment was supplied.
Over the past few years, the Ugleprom company has taken part in projects for the modernization of paper machines (development of technical documentation, manufacture and supply of equipment to pulp and paper enterprises, installation).
Enterprises of the pulp and paper industry of Ukraine, to which equipment made by our company was supplied and installed:
|
№ |
Company |
Year |
Scope of work performed |
|
1 |
PJSC ‘Malinsky paper mill-Weidmann’ Malin sity Member of the international WICOR group (Switzerland) |
2016 |
Modernization of the paper machine – BP-15: modernization of pressing and drying parts, installation of a new size press, replacement of the drying hood, installation of mesh blowing chambers, modernization of the steam-condensate system, installation of rope filling. |
|
2015 |
The box forming |
||
|
2 |
PJSC “Kiev KBK”, Obukhov sity |
2015 |
Tambour shafts KDM o.sh. 4200 mm |
|
2014 |
Tambour shafts KDM o.sh. 4200 mm |
||
|
2010 |
Cylinder nakata KDM o.sh. 4200 mm. |
||
|
3 |
LLC “Poninkovskaya KBF”, |
2016 |
KADANT pulper rotor and sieve |
|
2015 |
Shafts are mesh-leading drying part. |
||
|
2014 |
Press roll repair, spare parts for pulper, impeller, sieves |
||
|
2013 |
Pulper rotor GRV-16 |
||
|
4 |
JSC “Kohavinskaya BF”, br smt. Gnizdichev, |
2015 |
Spray with a drive, press shafts, brackets, pulper sieve, sorting sieve, press roll repair, vortex screen rotor, rotor knives |
|
2014 |
Accelerating shafts, bearing housings, press shaft diameter 710 mm o.sh. 2100 mm. |
||
|
2013 |
Replacement of the press part, clamping force up to 90 kN / m o.sh. 2100 mm (Tissue). Pulper rotor GRV-16 |
||
|
2012 |
Modernization of PM # 2 for the production of sanitary and hygienic paper, in the amount of: installation of vortex conical cleaners, modernization of the headbox, complete mesh table, elements of the wiring of the pressed felt o.sh. 2100 mm. |
||
|
2010 |
Sieve, inlet chamber rotor knife, outlet chamber rotor knife, shafts. |
||
|
5 |
OJSC ‘Lutsk Cardboard and Roofing Plant’ Lutsk |
2015 |
Drum and rotor repair. |
|
2014 |
Size press shafts for machine o.sh. 4200mm |
||
|
2011 |
Reflector GRS-80, attachment GRS-80, sieve of sorting pulper GRS-200 |
||
|
2010 |
Sieve for GRS-200 with milled grooves for better grinding before breaking up. |
||
|
6 |
JSC ‘Rubezhanskiy Cardboard and Container Plant’ |
2014 |
Heating cylinder for corrugated cardboard production line 2100 mm, P = 10 BAR |
|
2013 |
Heating cylinder, pulling and leveling shafts for corrugated board production lines |
||
|
2010 |
Modernization of the grid table, sieves for pulper and turbo separators of increased wear resistance, sieve of HP10 pulper, hole diameter 12mm, sieve GRS -200 |
||
|
7 |
LLC ‘Zhytomyr Cardboard Plant’ Zhytomyr |
2016 |
Repair of press rolls, reel drum, bearing unit GRV-05. |
|
2015 |
Units for the modernization of the mesh and press parts of the PM o.sh. 2520 mm. Pulleys, chest shaft, mesh shafts. Shafts cloth and wire-carrying paper machine o.sh. 2520mm. Diablo rotor and sieve, glue rolls |
||
|
2013 |
Sieve GRS-200, rotor, glue applicator shafts and leveling glue machine for corrugated board production line |
||
|
8 |
LLC “First Donetsk Factory”, Donetsk |
2014 |
Shafts mesh-felting machines o.sh. 2100mm. |
|
2013 |
Lionfish GRS |
||
|
2009 |
Fiberizer sieve, Fiberizer rotor. |
||
|
9 |
LLC ‘Amethyst’, Chernihiv |
2015 |
Hydraulic breaker GRV-02: bearing unit, impeller, chamber, sieve. |
|
2013 |
Modernization of the GRV-03 pulper: installation of a flat sieve. |
||
|
10 |
Papir-Mal LLC Malin |
2013 |
Cones ОМ-02 |
|
2012 |
High pressure spray with electromechanical drive and control system |
||
|
2007 |
Tambour shafts, heat recovery units, drying part hood. |
||
|
11 |
PJSC “Zhidachevsky PPM”, |
2012 |
Mesh vacuum-forming machine ‘Hartman’ |
|
2009 |
Defibrers modernization; Second mesh; Spare parts for a pulp mill, felt rolls, disintegrator; Bandages for debarking drums, centricliner cone UVK. |
||
|
12 |
LLC “Dnepropetrovsk BF”, Dnepropetrovsk |
2012 |
Fan wheel Æ1600mm, suction shaft seal clamping frame, calender shaft repair. |
|
2007 |
Line for lowering rolls of paper machine o.sh. 3200mm, modernized impeller DGV-05m. |
||
|
13 |
PJSC Izmail CKK, |
2012 |
Steam heads (10 pcs.), sieves PAPSKRIN |
|
2008 |
Sieve GRV-U-05M, modernization of the hydraulic pulper GRV-05, repair of the press shaft. |
||
|
14 |
LLC ‘ASS-Korostyshevskaya BF’, Korostyshev |
Cleaner cones, agitator propeller, waste paper feed conveyor and waste conveyor, calender roll repair. | |
|
15 |
Donetsk-Vtorma LLC, |
2012 |
Sieve GRS, automatic mesh corrector with mesh control sensor |
|
2011 |
Automatic mesh-cloth, impulse device, sieves. |
||
|
16 |
PJSC “Podolsky Cement” |
2015 |
Rotary gate rotor, tower lattices, plate chains, forks, springs, buckets, suspensions, supports. |
The enterprises of the mining and metallurgical complex to which the equipment manufactured by our company and the list of works performed under the guidance of our specialists were supplied:
1. LLC Nikolaev Alumina Plant:
- Hydroclassifier;
- Mixing devices up to 30m high;
- Gas flues. Air ducts;
- Belt feeders;
- Cleaning rollers;
- Spare parts for units.
2. JSC ‘Dnepropetrovsk Switch Plant’:
- Mechanization and automation for modular machine tool AS-2004;
- Mechanization for the band saw MP6-1943;
- Slipway;
- Manipulator for punching gaskets
3. JSC “Kremenchug Steel Plant”:
- Mechanized line for assembling the frame of the railway rolling stock bogie transport with the introduction of the line, the productivity of the assembly of frames has increased 2 times even under partial load;
- Repair of roller crushers;
- Manufacturing of driven roller tables;
- Tensioning and driving stations, shaft Ø up to 1800mm, rubber coated;
- Manufacturing of conveyors and conveyors;
- Lining elements of mills, crushers, sludge lines.
4. Kamenets-Podolsk Cement Plant CJSC:
- Gas ducts, air ducts up to 6000 mm in diameter;
- Steel structures;
- Non-standard equipment.
